Welcome
hp printer test page
Do you have a problems with HP Print and Scan test page ?
This is a common problem and causes is :
* The printer does not contain enough paper So it will print a test sheet
Do not let the printer never paperless
* you may used a new ink
*An error in the printing and paper or blackouts Job from the printer so the printer will print test page
for fix this problem follow the following :
1. Turn off the printer and wait 10 seconds. Turn it on again
2. Let the printer print the test page.
3. After the test page is printed, disconnect the USB cable connecting the printer to your computer. DO NOT turn off the printer while disconnecting the USB cable.
4.
Place the test page on the scanner glass and press the SCAN button on
the printer. The ON light will flash as the page is being scanned.
5. Remove the test page when the ON light is steady
6. Finally, turn off the printer and wait another 10 seconds. Then turn it on again. No more printing test pages! Yay!
(You may now reconnect the printer to your computer via the USB cable.)
this answer by :
Richard J
Want to turn off Auto Print test page in HP PSC 1402 All in One Inkjet printer,?
http://answers.yahoo.com/question/index?qid=20090315205040AAlQM5h
http://answers.yahoo.com/question/index?qid=20090315205040AAlQM5h
you can also stay press on cancel for stop print test page
more answers :
HP PSC 1402 - stop it printing a test page
******
If you're still having problems with a printer (hp) please visit hp Official website and download (HP Print and Scan Doctor) For explore what is the problem with your printer or scanner from here
Thanks for reading
Good luck
ليست هناك تعليقات:
إرسال تعليق